Languages / Langues:
English / Anglais
French / Francais

Red One Systems - Camera Accessories









 

CAMERA ACCESSORIES



 Camera Pole

Miller Built Products home of the Red One trolling motor systems has developed another fine system that really fits right into the video recording world.


                                             Introducing, “The Red One Camera Pole

This Red One system was designed to be used with the Go Pro camera which is the most widely used small video camera of today. It will also accept a camera with a ¼ /20 threaded hole.

This Red One Keeper system starts with 9’ or 13' of red vinyl coated, 100% stainless aircraft cable for strength, safety and a no rust material. At 9’ and 13' the cable system allows plenty of length to reach from your Go Pro camera to a secure location.

An extendible aluminum pole is attached to a clamp that then attaches to any 2” shaft such as a trolling motor or pedestal. For shafts smaller than 2” another clamp is available. At approximately 8’ & 12' extended this can give you the look of a camera boat filming you from the front and sides of your boat. By simply removing the allen screw the Camera Pole will drop in a ¾” seat pedestal hole for a bird’s eye view from way up the sky.
   

A premeasured eye in the cable fits right over the tensioner shaft of the Go Pro camera and is swaged on with a stainless sleeve. A plastic spring ball is added on the system to take up any slack around the object you wish to attach to and then a 100% stainless steel snap is swaged on the opposite end with another stainless sleeve.

Installation of the cable is a breeze. Just unscrew the Go Pro tensioner, slip the Red One Camera Keeper eye on the plastic shaft and reinstall the Go Pro tensioner. Loop the opposite end of the system around a secure non-living object, clip the Keeper around the cable and slide the spring ball to the clip.

Get the hottest shots ever with the Red One Camera Pole system.
 


 


8 foot Camera Pole


Item# ROS-CP8

Price: $129.99

Availability: In-Stock

12 foot Camera Pole

Item# ROS-CP12

Price: $149.99

Availability: 5-7 business days


 
 

 Camera Keeper

A lot of sportsmen are having their outings recorded on cameras. From explosive top water excitement and wild bass boat runs to their favorite spots, the video camera has become the standard for the amateur short film maker. From cameras like the Go Pro, fishermen and other outdoor fun seekers can capture moments that can make them an instant star and in some cases a lot of money. Most Go Pro cameras start at around $200.00, but the thrill seeker can spend over $500.00 very easy. Unfortunately the attachment adhesive for these fine little cameras does not stick well to rough surfaces and lost Go Pro stories abound on Google and other product feedback sites.  


Miller Built Products home of the Red One trolling motor systems has developed another fine system that really fits right into the video recording world.


                                           Introducing, “The Red One Camera Keeper

This Red One system was designed to be used on the Go Pro camera which is the most widely used small video camera of today.


This Red One Keeper system starts with 36” of red vinyl coated, 100% stainless aircraft cable for strength and a no rust material. At 36” this system allows plenty of length to reach from your Go Pro camera to a secure location.


A premeasured eye is looped that fits right over the tensioner shaft of the Go Pro camera and is swaged on with a stainless sleeve. A plastic spring ball is added on the system to take up any slack around the object you wish to attach to and then a 100% stainless steel snap is swaged on the opposite end with another stainless sleeve. The system held over 150lbs. in a dead lift test without failure. Plenty strong enough for a Go Pro camera. All stainless steel metals means the finest of materials are used that you spend your hard earned money on to keep your Go Pro onboard for a very long time in the event of a mount failing.


Installation is a breeze. Just unscrew the Go Pro tensioner, slip the Red One Camera Keeper eye on the plastic shaft and reinstall the Go Pro tensioner. Loop the opposite end of the system around a secure non-living object, clip the Keeper around the cable and slide the spring ball to the clip.


The system also has a pedestal pod to be used in a seat pedestal. Just peal and stick the Go Pro mount that came with your camera onto it and attach your Go Pro. It fits a ¾” hole.


Keep that Go Pro camera onboard with the Red One Camera Keeper system.

 
  Item# ROS-CK

Price: $24.99

Availability: In-Stock

Camera Keeper



 




RED ONE
WEDGIE SPLIT RING TOOL

 



MILLER TUNGSTEN
1.5 OZ PUNCHIN WEIGHT

 

 
TROLLING MOTOR REPLACEMENT CABLE SYSTEMS

 


Solution Graphics

PayPal Acceptance Mark



FISHNTECH, LACHUTE, QUEBEC, CANADA
 

Website Builder