BOW MOUNT STABILIZER KITS
|
MKA-50 FORTREX BOW-MOUNT STABILIZER KIT
Reduces motor bouncing when in
stowed position. Attaches to the left
or right side of bowguard. Pivots into vertical position and rests on the boat deck when motor is stowed. Rotates in the horizontal position with bowguard when the motor is deployed. Includes rubber bumper to protect deck finish. Stainless steel hardware tested for saltwater use. Fits any Fortrex or
Riptide SF bow-mount trolling motors.
Item# 1862050
Price: C$59.99
|
 |
MKA-29 SIDE MOUNT STABILIZER KIT
Reduces bounce on Maxxum and Riptide SM bow-mount trolling motors. Fits between upper and lower arm of mounting bracket. Pivots into vertical position when the motor is stowed to reduce bounce from heavy chop or wake. Rotates into a horizontal position along the side upper arm when the motor is deployed. Saltwater-tested and fully corrosion resistant.
Item# 1862012
Price: C$54.99
|
|
MKA-4 STABILIZER KIT
Reduces bounce on Maxxum, Maxxum Pro, Riptide SM and Riptide Pro bow-mount trolling motors. Attaches to the top side of the upper arm of the scissors mount. When the motor is stowed, the adjustable stabilizer is positioned vertically between the upper arm of the bracket and the deck of the boat. Rubber bumper also protects the deck.
Item# 1862013
Price: C$39.99
|
 |
CABLE, ROPE & HANDLES
|
MKA-49 CABLE & HANDLE
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.
Item: 1854125
Price: C$64.99
|
 |
MKA-45 REPLACEMENT ROPE & HANDLE
Features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope. Compatible with Maxxum and Edge bow-mount trolling motors.
Item: 1854120
Price: C$13.99
|
 |
CIRCUIT BREAKER
|
MKR-19 CIRCUIT BREAKER
Protects boat trolling motor wiring from electrical damage. Features a 60 amp rating with manual reset. Fully waterproof. Compatible with all 12-, 24- and 36-volt systems.
Item: 1865106
Price: C$54.99
|
 |
| PLUGS & RECEPTACLES |
Marinco - 12VCP PLUG & RECEPTACLE
Universal design for 2- or 3-wire configurations on 12, 24 or 36-volt systems. Watertight sealing cap and corrosion-resistant electrical components. Requires standard 1-1/8" diameter mounting hole. (MKR 18A Adapter sold separately).
Item# 12VCP
Price: C$59.99
|
|
MKR-18A 6 GAUGE ADAPTER
Allows for 6-gauge wire connection when using the MKR-18 Trolling Motor Plug & Receptacle. (MKR-18 Trolling Motor Plug & Receptacle sold separately).
Item#1854101
Price: C$19.99
|
|
Marinco - 12VCPS3 PLUG & RECEPTACLE - "BEST SELLER"
70A plug and receptacle for modern trolling motors in a compact, waterproof footprint. The plug features an integrated strain relief and thumbprint locator to mate with the keyed receptacle.
- 70A continuous rating
- Universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V systems
- Corrosion resistant, plated brass electrical components
- Receptacle contains watertight sealing cap
- Plug contains Integrated strain relief and keyed design with thumbprint locator
- Accepts up to 6 AWG wire
Item#12VCPS3
Price: C$69.99
|
|
MKR-20 TROLLING MOTOR QUICK CONNECT PLUG
Heavy-duty trolling motor connector has a positive snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included).
Item#1865107
Price: C$24.99
|
|
QUICK RELEASE BRAKETS
|
MKA-52/62 QUICK RELEASE BRACKET
For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 52" and 62" shaft foot control motors and 62" shaft hand control motors.
Item# 1862016
Price: C$199.99
|
 |
MKA-42 QUICK RELEASE BRACKET
For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 42" shaft foot control motors, 42" and 52" shaft hand control motors.
Item# 1862014
Price: C$174.99
|
|
MKA-48 UNIVERSAL QUICK RELEASE BRACKET-TOP ONLY
Accessory to the MKA-47 Universal Mounting Bracket which allows you to easily switch between cable steer and electric steer motors, so you can choose the right trolling motor for the application.
Item: 1854045
Price: C$61.99
|
 |
MKA-32 QUICK RELEASE BRACKET WITH COVER - "BEST SELLER"
Quickly remove any Ulterra, Terrova, PowerDrive V2 or PowerDrive bow-mount trolling motor. Cam-lock design and ultra-tight tolerances eliminate bracket movement and noise. Locking lever includes pin and lanyard. Upper and lower plates can be secured with padlock (not included). Composite cover attaches to lower half of bracket when motor is removed, keeping the deck profile clean.
Item: 1854060
Price: C$199.99
|
  |
MKA-23 QUICK RELEASE BRACKET
Easily remove your Fortrex, Maxxum, Maxxum Pro, Edge or All-Terrain bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with a padlock (not included).
Item: 1854023
Price: C$134.99
|
|
MKA-21 QUICK RELEASE BRACKET
Easily remove your Ulterra, Terrova*, PowerDrive V2, PowerDrive or Pontoon Foot Control bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with a padlock (not included).
*MKA-21 is not compatible with 72" shaft length trolling motor models
Item: 1854021
Price: C$109.99
|
 |
RTA-19 QUICK RELEASE BRACKET
Easily remove your Riptide SF, Riptide SM or Riptide SE bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with a padlock (not included).
Item: 1854019
Price: C$134.99
|
|
RTA-17 QUICK RELEASE BRACKET
Easily remove your Riptide ST or Riptide SP bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with a padlock (not included).
Item: 1854017
Price: C$109.99
|
 |
MKA-16-03 QUICK RELEASE BRACKET
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
Item: 1854035
Price: C$79.99
|
 |
MKA-51 QUICK RELEASE BRACKET
The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
Item: 1854051
Price: C$334.99
|
 |
MKA-53 QUICK RELEASE BRACKET
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lenghts. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).
Compatible with Ulterra, Terrova and Power Drive - 72" shaft trolling motors
Item: 1854053
Price: C$269.99
|
 |
RTA-54 QUICK RELEASE BRACKET
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lenghts. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).
Compatible with Riptide Ulterra, Riptide Terrova and Riptide Power Drive - 72" shaft trolling motors
Item: 1854054
Price: C$269.99
|
 |
| UNIVERSAL SONAR 2 ADAPTER CABLES |
MKR-US2-1 UNIVERSAL SONAR 2 ADAPTER CABLE-GARMIN
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Garmin fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852061
Price: C$39.99
|
|
MKR-US2-8 UNIVERSAL SONAR 2 ADAPTER CABLE-HB 7-PIN
Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
*200 kHz/83 kHz compatible and only provides traditional 2D sonar
Item#1852068
Price: C$39.99
|
 |
MKR-US2-9 UNIVERSAL SONAR 2 ADAPTER CABLE LOWRANCE-EAGLE 6-PIN
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852069
Price: C$39.99
|
 |
MKR-US2-10 UNIVERSAL SONAR 2 ADAPTER CABLE-LOWRANCE
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852060
Price: C$39.99
|
 |
MKR-US2-11 UNIVERSAL SONAR 2 EXTENSION CABLE
Extension cable allows for an additional 14-1/2 ft of length to your US2 adapter cables that connect your fishfinder with a US2 transducer on your trolling motor. Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Waterproof construction.
Item#1852080
Price: C$54.99
|
 |
MKR-US2-12 UNIVERSAL SONAR 2 ADAPTER CABLE-GARMIN ECHO
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Garmin fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852072
Price: C$39.99
|
|
MKR-US2-13 UNIVERSAL SONAR 2 ADAPTER CABLE-HUMMINBIRD ONIX
Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird ONIX fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
*200 kHz/83 kHz compatible and only provides traditional 2D sonar
Item#1852073
Price: C$69.99
|
 |
MKR-US2-14 UNIVERSAL SONAR 2 ADAPTER CABLE-GARMIN 8-PIN
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Garmin fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852074
Price: C$39.99
|
 |
MKR-US2-15 UNIVERSAL SONAR 2 ADAPTER CABLE-LOWRANCE HOOK 2
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Hook2 fish finder with a Universal Sonar 2 transducer on your trolling motor.
Item#1852075
Price: C$39.99
|
|
MKR-US2-16 UNIVERSAL SONAR 2 ADAPTER CABLE-LOWRANCE ELITE Ti2 & HDS
Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Elite Ti2 and HDS fish finder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
Item#1852076
Price: C$39.99
|
|
MKR-MDI-2 MDI Adapter Cable / HUMMINBIRD HELIX 7
MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3 or G3N fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.
Item#1852086
Price: C$39.99
|
|
MKR-MI-1 MI Adapter Cable / Humminbird HELIX 8-12
MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor.
Item#1852088
Price: C$39.99
|
|
