Languages / Langues:
English / Anglais
French / Francais

RAM Mounts - Camera Mounts

Marine Electronics Mounts
Size C
Size D
Size E
Swing Arm Bases Aquabox Mounts Trolling Motor Mounts
Camera Mounts  Fishing Rod Holders  Kayak Mounts
RAM-B-138-A-GOP1U RAM-B-149Z-2-GOP1U
Price:C$36.99
Item code:
RAM-B-138-A-GOP1U
Availability: In-Stock



Price:C$54.99
Item code:
RAM-B-149Z-2-GOP1U
Availability:
5-7 business days


The RAM-B-138-A-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, SHORT size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-138-A-GOP1U can be used as a drill-down or a temporary, removable mounting solution with the addition of the RAP-339U accessory.

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Compatible GoPro® Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
HERO3 (White, Black and Silver Editions)

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


The RAM-B-149Z-2-GOP1U consists of a steel strap base, u-bolt bases, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware.

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Compatible GoPro® Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
HERO3 (White, Black and Silver Editions)

Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size
 
RAM-B-166-A-GOP1U RAM-B-149Z-A-GOP1U
Price:C$49.99
Item code:
RAM-B-166-A-GOP1U
Availability: In-Stock


Price:C$49.99
Item code:
RAM-B-149Z-A-GOP1U

Availability:
5-7 business days


The RAM-B-166-A-GOP1U consists of a 3.25" twist lock suction cup base, SHORT size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Compatible GoPro® Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
HERO3 (White, Black and Silver Editions)

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


 

The RAM-B-149Z-A-GOP1U consists of a zinc coated u-bolt base, SHORT size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5".

The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Compatible GoPro® Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
HERO3 (White, Black and Silver Editions)

U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM-B-201U RAM-B-201U-C
Price:C$18.99
Item code:RAM-B-201U
Availability:
In-Stock

Price:C$27.99
Item code:RAM-B-201U-C
Availability: 5-7 business days


The RAM-B-201U, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

ramb201.pdf


The RAM-B-201U-C, long double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 6"
Socket-To-Socket Length: 5.1875"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

ramb201c.pdf
RAM-B-201U-A RAM-B-237U
Price:C$18.99
Item code:RAM-B-201U-A
Availability: In-Stock

Price:C$10.99
Item code:RAM-B-237U
Availability: In-Stock


The RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 2.38"
Socket-To-Socket Length: 2"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

 

The RAM-B-237U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.

Compatible Cameras:
Contour GPS
Contour HD
Gobandit GPS-HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

ramb237.pdf
 
RAP-B-202U-GOP1 RAM-B-231Z-2
Price:C$14.99
Item code:
RAP-B-202U-GOP1
Availability: In-Stock

Price:C$31.99
Item code:RAM-B-231Z-2
Availability: 5-7 business days


GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO™”.

The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

Compatible GoPro® Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
HERO3 (White, Black and Silver Editions)

Features:
1. Patented rubber ball design dampens shock and vibration helping to extend the life of your camera.
2. Mount to many RAM double socket arms and mounts.
3. Multiple articulation and adjustment points for perfect viewing angles.
4. Lifetime warranty.

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size
 

Whether your UTV or ATV is bone stock or loaded with accessory racks and guards, the new RAM strap base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base accommodates most common tubing sizes on UTV’s and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won’t have to worry about exposed sharp edges or unwanted loosening. With the ball base in place, you have the foundation for mounting everything from GPS, Cell Phones, Radios, or maybe the famous RAM self-leveling drink cup holder. No matter what you choose to do with it, you’ll wonder why your UTV or ATV didn’t come from the factory with this must-have product. Included in the kit is a zinc coated metal u-bolt, this allowing you to modify the mount to accommodate mounting location. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.

Strap Dimensions:
1.57" (40mm) to a maximum of 3.15" (80mm)

U-Bolt Holding Dimensions:
0.50" to a maximum of 1.25"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM-B-202U RAM-B-238U
Price:C$9.99
Item code:RAM-B-202U
Availability:
5-7 business days

Price:C$9.99
Item code: RAM-B-238U
Availability:
5-7 business days


The RAM-B-202U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


ramb202

The RAM-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

  ramb238.pdf

RAM-B-224-1U
RAM-B-231ZU
Price:C$24.99
Item code:RAM-B-224-1U
Availability:
5-7 business days

Price:C$20.99
Item code:RAM-B-231ZU
Availability: 5-7 business days



The RAM-B-224-1U consists of a 3.25" twist lock suction cup base that is connected to the (RAM-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


 

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size



 


You might also be interested in


 


T-H Marine
Cook's Tackle System



Stowmaster
Landing Nets


The Oxygenator
Pro Live Well Flush Mount

PayPal Acceptance Mark



FISHNTECH, LACHUTE, QUEBEC, CANADA
 

Website Builder