Languages / Langues:
English / Anglais
French / Francais

RAM Mounts - Marine Electronics Mounts - Size D

Marine Electronics Mounts
Size C
Size D
Size E
Swing Arm Bases Aquabox Mounts Trolling Motor Mounts
Camera Mounts  Fishing Rod Holders  Kayak Mounts
RAM-D-202-25-C-202U / Helix 9-10-12
RAM-D-202U-25U / Helix 9-10-12
Price:C$139.99
Item code:
RAM-D-202-25-C-202U

Availability: 2-3 Business Days



Price:C$49.99
Item code: RAM-D-202U-25U
Availability: 2-3 Business Days


 

The RAM-D-202-25-C-202U, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2" x 5" rectangular plate. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjust ability, So you can set your device at the perfect viewing angle, while suited for any rugged environment.

Overall Length: 7.875"

Note: The "U" in the part number reflects product packaged in poly bag.

Weight Capacity: Up to 15 lbs.

Weight: 3.07 lbs.

The RAM-D-202-25-C-202U is Compatible With:

Humminbird - Helix 9
Humminbird - Helix 10
Humminbird - Helix 12


The RAM-D-202U-25U consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.

Material:
Powder Coated Marine Grade Aluminum

Ball Size: 2.25" Rubber Ball Size

Note: The "U" in the part number reflects product packaged in poly bag.

Weight: 0.69 lbs. 

The RAM-D-202U-25U is Compatible With:

Humminbird - Helix 9
Humminbird - Helix 10
Humminbird - Helix 12
RAM-D-202-25-202U / Helix 9-10-12
SMP - RAM Mount Base 2.5
Price:C$164.99
Item code:
RAM-D-202-25-202U

Availability: 2-3 Business Days



Price:C$24.99
Item code: SMP-2.5BASE
Availability: In-Stock




The RAM-D-202-25-202U, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2" x 5" rectangular plate. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjust ability, So you can set your device at the perfect viewing angle, while suited for any rugged environment.

Overall Length: 11.125"

Note: The "U" in the part number reflects product packaged in poly bag.

Weight Capacity: Up to 15 lbs.

Weight: 4.94 lbs.

The RAM-D-202-25-202U is Compatible With:

Humminbird - Helix 9
Humminbird - Helix 10
Humminbird - Helix 12



The Select Marine Products (SMP) - RAM Mount Base 2.5,
creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application.

Compatible RAM Mounts:
Compatible with all RAM-D-202U 2.25" diameter ball bases that contain a three hole, 120 degree hole pattern.

View other Select Marine Products
    
   Humminbird Helix 12 SI GPS shown on RAM-D-202-25-C-202U
RAM-D-111U-C
RAM-D-111U
Price:C$139.99
Item code:RAM-D-111U-C
Availability: In Stock


Price:C$164.99
Item code:RAM-D-111U
Availability: In Stock



The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird 800, 900 &1100 Series Fishfinders GPS Combos
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters

Overall Height: 8.125"

Weight Capacity: Up to 15 lbs.

Weight: 3.45 lbs.

Material: Powder Coated Marine Grade Aluminum

Ball Size: 
2.25" Rubber "D" Ball Size

Note: The "U" in the part number reflects product packaged in poly bag.

ramd111c.pdf


The RAM-D-111U consists of a double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

The RAM-D-111 is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters

Overall Height: 11.375"

Weight Capacity: Up to 15 lbs.

Weight: 5.32 lbs.

Material: Powder Coated Marine Grade Aluminum

Ball Size: 2.25" Rubber "D" Ball Size

Note: The "U" in the part number reflects product packaged in poly bag.

  ramd111.pdf

RAP-S-NUT5U RAP-S-NUT5-GU
Price:C$9.99
Item code:RAP-S-NUT5U
Availability: In Stock


Price:C$26.99
Item code:RAP-S-NUT5-GU
Availability: In Stock



RAM Mixed Combination Pin-Lock™ Security Nut and Key Knob for 2.25"/3.38" Diameter D/E Size Arms
The RAP-S-NUT5U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5U replaces all knobs on 2.25"/3.38" diameter D/E size arms and mounts. The RAP-S-NUT5U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.
             
Specifications/Features
Material:
High Strength Composite

RAM Mixed Combination Pin-Lock™ Security Knob/Stud/Key Knob for 2.25"/3.38" diameter D/E size arms and Gimbal Brackets
The RAP-S-NUT5-GU replaces the knob on 2.25"/3.38" diameter D/E size arms and gimbal bracket. The RAP-S-NUT5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5-GU is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.
            
Specifications/Features
The RAP-S-NUT5-G consists of the following:
1. 1/2"-20 female threaded security lock knob and stud for (Gimbal Brackets)
2. 1/4"-20 brass security jam nut for (RAM 2.25/3.38" Diameter Ball Double Socket Arms)
3. Key Knob

Material:
High Strength Composite 
RAM-D-201-U RAM-D-111BU
Price:C$84.99
Item code:RAM-D-201U
Availability: In Stock


Price:C$59.99
Item code:RAM-D-111BU
Availability: In-Stock



The RAM-D-201U, standard size double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size
 
ramd201.pdf
 

The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11 x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber "D" Ball Size

ramd111b.pdf
RAM-D-235U RAM-D-202U
Price:C$54.99
Item code:RAM-D-235U
Availability: Special Order


Price:C$34.99
Item code:RAM-D-202U
Availability: In Stock


The RAM-D-235U consists of a stainless steel double u-bolt base connected to a 2.25" diameter ball. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size




The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size

ramd202.pdf
 
RAM-D-201U-C-MI1 with Jam Nut RAM-D-201U-MI1 with Jam Nut
Price:C$69.99
Item code:RAM-D-201U-C-MI1
Availability: In Stock

Price:C$94.99
Item code:RAM-D-201U-MI1
Availability: In Stock


The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size



 

The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size 


ramd201mi1.pdf
 
RAM-D-201U-E
RAM-D-201U-E-MI1 with Jam Nut
Price:C$109.99
Item code: RAM-D-201U-E
Availability: 2-3 Business Days



Price:C$119.99
Item code: RAM-D-201U-E-MI1
Availability: 2-3 Business Days



The RAM-D-201U-E, long double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 12.875"
Socket-To-Socket Length: 11.1875" 

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size

Weight: 2.58 lbs.
 

The RAM-D-201U-E-MI1, long double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 12.875"
Socket-To-Socket Length: 11.1875" 

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size

Weight: 2.78 lbs.

RAM Handle Wrench for "D" Size Ball Arms & Mounts
RAM-D-201U-C
Price:C$29.99
Item code: RAM-KNOB9HU
Availability: In Stock



Price:C$59.99
Item code:RAM-D-201U-C
Availability: In Stock



The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber "D" Ball Size

ramknob9hu.pdf

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size

 


 

Customers Who Viewed These Items Also Viewed

 
 
Select Marine Plastics
RAM Mount Base 2.5
TH Marine

T-H Flex Expandable
Braided Sleeving

Peregrine





Fish Finder
Screen Cleaning Kit


You might also be interested in


 


T-H Marine
Cook's Tackle System



Stowmaster
Landing Nets


The Oxygenator
Pro Live Well Flush Mount

PayPal Acceptance Mark



FISHNTECH, LACHUTE, QUEBEC, CANADA
 

Website Builder